Lead Pipes in DC: How to Check Your Service Line (2026)
November 14, 2026 · 6 min read
DC Water estimates that more than 42,000 service lines in the District still contain lead or galvanized iron. A service line is the pipe that brings water from the main under the street into your house. Here's how to find out about yours, what replacing it costs, and how to protect the water you drink in the meantime.
Why the service line matters
Lead in DC's tap water doesn't come from the treatment plant. It comes from the pipes it passes through on the way to your faucet: a lead service line, lead solder in homes plumbed before 1986, or older brass fixtures. That's why two houses on the same street can have very different results.
How to check your service line
- Look up your address on DC Water's Service Line Inventory Map, which shows what's recorded for each property.
- Look at the pipe yourself where it comes through the basement wall to the meter or shut-off. Lead is dull gray, soft enough that a key scratch shows shiny silver, and a magnet won't stick to it.
- Ask DC Water at lead@dcwater.com or 202-787-4044 if the record is unknown or doesn't match what you see.
Who pays for replacement
DC Water runs four programs. Which one fits depends on whether the lead is on the public side, your side, or both:
| Program | Who pays for your side |
|---|---|
| DC Water-initiated replacement, when DC Water is already working on your block | Free, once you sign a Right of Entry agreement |
| Lead Pipe Replacement Assistance Program, for lead on your side only | Free or discounted, using District funds when available |
| House by House Priority Full Replacement | Free for both sides, for eligible households, subject to funding |
| Voluntary full replacement, when you want it done sooner | You pay for the work on your property; DC Water pays for the public side |
Terms and funding change, so confirm the details on DC Water's lead pipe replacement page before you plan around one.
What to do in the meantime
- Test. For lead, use a state-certified lab. Our free water test measures total dissolved solids, which is useful, but it isn't a lead test.
- Run the cold tap for a minute or two when the water has sat for hours, and drink and cook only with cold water.
- Filter at the tap. Look for a filter certified to reduce lead, under NSF/ANSI 53 or 58. Reverse osmosis is one of the most thorough options because it works at the faucet, after every pipe. Our own lab test didn't measure lead, so test before and after if lead is your reason for filtering.
A replacement fixes the service line, but not the solder or fixtures inside older houses. Our lead guide explains the rest, and the DC water quality report covers what else is in the District's water. We install under-sink reverse osmosis across DC; see reverse osmosis installation in Washington, DC.
Frequently asked questions
DC Water estimates that more than 42,000 service lines in the District contain lead or galvanized iron.
Look up your address on DC Water's Service Line Inventory Map, check the pipe where it enters your basement (lead is dull gray, scratches shiny and isn't magnetic), or contact DC Water at lead@dcwater.com.
Often, yes. Private-side replacement is free when DC Water is already working on your block and you sign a Right of Entry agreement, and assistance programs offer free or discounted replacement subject to funding. If you choose to replace early on your own schedule, you pay for the private side.
Filters certified to NSF/ANSI 53 or 58 for lead reduce it at the tap. Reverse osmosis is among the most thorough options. Test with a certified lab before and after to confirm the result in your home.
