Reverse osmosis installation in DC, Maryland and Virginia
We install the Hydra tankless reverse osmosis system, an under-sink water filter with its own faucet, in about 45 minutes, across Northern Virginia, DC and Maryland. Want to know what's in your water first? In Northern Virginia we test it free at your tap; anywhere else we mail a free kit.
- In-home water test
- Freeno obligation
- Hydra, professionally installed
- $1,250
- Hydra, fit it yourself
- $999
Based in Arlington. 3-year warranty, 60-day returns, free shipping in the U.S.
Book a free in-home water test
About 45 minutes at your kitchen sink. We reply within one business day to set a time.
Installed for you
$1,250
- The Hydra 5-stage tankless reverse osmosis system
- Its faucet, tubing and every fitting
- Professional installation under your sink, with a leak check
- Drilling the faucet hole in your countertop, if you need one
- The first 30-minute rinse, so it's ready to drink from
- 3-year warranty and 60-day returns
Install it yourself
$999
- The same system, faucet and fittings
- Free shipping anywhere in the U.S.
- A step-by-step installation guide and a real person on the phone if you get stuck
- Or find a local installer outside our area
How to install a reverse osmosis system
Whoever does it, a Hydra install is the same five steps. It's routine plumbing, and because the Hydra is tankless there's no tank to find room for.
- Shut off the cold water under the sink and fit the inlet tee to the valve.
- Stand the Hydra in the cabinet and connect the tubing to its labeled fittings.
- Clamp the drain line to the sink drain with the included saddle clamp.
- Mount the Hydra faucet beside your kitchen faucet.
- Turn the water back on, check every connection for drips, and run the 30-minute rinse.
How to book
Choose Professional Installation when you order the Hydra, and we'll reach out to you to schedule the install. Not sure yet? Start with a free water test: in Northern Virginia we'll test at your tap in person, and we mail a kit anywhere else.
Wondering what's in your water first? Every area below has its own report, from EWG and EPA test results.
Where we install
- Arlington, VA
- Alexandria, VA
- Fairfax, VA
- McLean, VA
- Bethesda, MD
- Silver Spring, MD
- Rockville, MD
- Washington, DC
- Ashburn, VA
- Leesburg, VA
- Reston, VA
- Herndon, VA
- Vienna, VA
- Falls Church, VA
- Woodbridge, VA
- Gaithersburg, MD
- Germantown, MD
- Frederick, MD
- Columbia, MD
- Towson, MD
- Full service area
Water reports for every place we serve:
Washington, DC
From customers we've installed for
See the lab results“Our tap water used to smell like chlorine and leave white spots everywhere, but this system completely transformed it. Now it tastes incredibly crisp.”
Priscilla
Arlington, VA
“Best decision for our home. The water tastes wonderful, clean and crisp. We have stopped buying bottled water!”
Tim
Arlington, VA
“I have all my friends try it when they come over, and their reaction is priceless.”
Patrick
Arlington, VA
Installation questions
Still have a question?
A real person on our team answers. Call or text (571) 397-4798, or send us a message.
It's one kind, and the most thorough. A basic under-sink filter is carbon only, which handles chlorine taste and some chemicals. Reverse osmosis adds a membrane that also holds back dissolved contaminants carbon misses, such as nitrate, many metals and PFAS. The Hydra has both: sediment and carbon stages, then the membrane.
With Sanavia, the Hydra system professionally installed is $1,250, in DC, Maryland and Virginia. The system alone, to install yourself, is $999, so professional installation adds $251.
About 45 minutes for most kitchens, then an automatic 30-minute rinse before the first glass. The Hydra is tankless, so there is no storage tank to place or pressurize.
Yes. The Hydra comes with every part and a step-by-step installation guide, and most kitchens take about 45 minutes. An adjustable wrench and a pair of scissors for the tubing, plus a towel or bucket for drips. Teflon tape, tubing and every fitting come in the box. You only need a drill with a hole saw bit if there is no spare sink hole for the faucet.
Space in the sink cabinet, a cold water shut-off valve that works, a power outlet in or near the cabinet (the Hydra is electric), and a spare sink hole for its faucet or permission to drill one.
Yes. If there's no spare hole for the Hydra faucet, drilling one in your sink or countertop is included in the $1,250 professional installation. After you order, we reach out to you to schedule the visit.
Across Washington, DC, Northern Virginia and Maryland, from our base in Arlington. Outside that area, the Hydra ships free anywhere in the U.S. for self-installation, or a local plumber can fit it.
Yes, with your landlord's OK. The install connects to the existing cold-water valve and sink drain and adds a faucet, so it comes out cleanly when you move, and the faucet hole is the only lasting change. If you can't drill, the faucet can use an existing sprayer or soap-dispenser hole.
Find out what's in your glass.
Your water test kit is free.