Free shipping · 60-day returns · 3-year warranty

Is DC, Maryland and Northern Virginia Water Hard?

November 14, 2026 · 5 min read

Most tap water around DC is moderately hard. It's enough to leave spots on glasses and scale in a kettle, but it's not the very hard water found in parts of the Midwest. Hardness isn't a health problem. It's a nuisance, and knowing your number tells you whether you need a softener, a filter, or neither.

The local numbers

UtilityHardnessSource
DC WaterTypically 70 to 120 ppm (3 to 9 grains per gallon), varying by area and seasonDC Water
WSSC Water, Potomac supplyAbout 120 to 130 mg/L: "tends to be hard"WSSC Water
WSSC Water, Patuxent supplyAbout 60 to 65 mg/L: soft to moderateWSSC Water
Prince William Water, East and West systems60 to 120 mg/L (3.5 to 7 grains per gallon): moderately hardPrince William Water

For scale, Prince William Water's own table rates 60 to 120 mg/L as moderately hard, 120 to 180 as hard, and over 180 as very hard. If your utility isn't listed here, its yearly water quality report gives a hardness figure. Look up your town in our water quality reports.

What hardness does and doesn't do

Hardness is mostly dissolved calcium and magnesium. Over time it leaves:

  • white spots on glasses and shower glass
  • scale inside kettles, coffee makers and water heaters
  • soap that lathers less well

It isn't a contaminant, and it isn't what health guidelines flag in this region. Those are disinfection byproducts, PFAS, chromium-6 and lead from older plumbing, which is a separate problem with a separate fix.

Softener, filter, or both?

  • If scale is the problem (fixtures, appliances, water heater), you need a water softener, installed where water enters the house. We don't sell softeners.
  • If drinking water is the problem (taste, chlorine, byproducts, PFAS, lead), you need a drinking-water filter. Reverse osmosis is the most thorough option, and it also takes the hardness minerals out of the water from that one tap.
  • If it's both, many homes use a softener for the house and reverse osmosis for the kitchen tap.

Our reverse osmosis vs water softener guide covers the choice in detail. To see your own numbers, get a free water test. The reading of total dissolved solids it gives includes hardness minerals along with everything else dissolved in the water.

If drinking water is your concern, the Sanavia Hydra is our under-sink reverse osmosis system: $999, or $1,250 installed.

Frequently asked questions

Mostly moderately hard. Prince William Water rates its main systems at 60 to 120 mg/L (3.5 to 7 grains per gallon), and Potomac River water across the region tends toward the harder end of that scale.

DC Water says its tap water is moderately hard, typically around 70 to 120 parts per million, or 3 to 9 grains per gallon, varying across the city and by season.

Only if scale on fixtures, appliances or your water heater bothers you. Hardness isn't a health issue. For drinking water, a filter such as reverse osmosis addresses the contaminants that matter for health.

Yes, for the water from the tap it's installed on. It doesn't soften the rest of the house, which is what a water softener is for.

Share:

What’s really in your tap? Find out in seconds.

Try
Lab-testedThe Sanavia Hydra reverse osmosis system with its faucet

Filter it out at home

$999$1,250Save $251

or 4 interest-free payments of $249.75 with Shop Pay

Reverse osmosis under your sink. It cut chlorine byproducts 95% in an independent lab test.

Free shipping · 60-day returns · 3-year warranty

Shop the Hydra

Find out what's in your glass.

Your water test kit is free.

Shop the Hydra